| |  12V 55W
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: H1H) |
|
| |  
These LED bulbs are a simple, quick, direct and brighter replacement for standard BA9S / GLB989 / GLB233, LLB233 bulbs. Suits all bulb holders taking the standard bulb as per these part numbers. Commonly fitted to sidelights, number plate lights, and Classic Ford car and tractor instrument & panel lights
As well as being brighter & lasting longer they have the additional benefit of reducing power consumption to a much lower level which may benefit older classic car wiring.
Sold individually
| Discount on quantity | | From | 10 | | Discount | 20.00% |
(Code: GLB989LED) |
|
| |  12V
60/55W| Discount on quantity | | From | 10 | | Discount | 20.00% |
(Code: 496) |
|
| |  
Suits classic Smiths, Jaeger & all other gauges taking the standard E10 screw bulb. The solution to poorly lit classic car gauges.
Struggling to read your gauges or warning lamps at night? These LED bulbs are a simple, quick, direct and brighter replacement for older style standard GLB987 / LLB987 / C15788 / E10 bulbs, suits all vehicles taking the standard screw in bulb. Have the additional benefit of reducing your power consumption to a much lower level which may benefit older/tired dash wiring.
12V 0.5 W 3000K 48 Lumen 8 SMD LED Warm White bulbs. They will work with vehicles fitted with 12v or dual 6v batteries, negative earth. Will not suit positive earth vehicles. These bulbs are just 18 mm in length so will fit easier than the 5 SMD bulbs (30mm) where the holder requires a shorter bulb. These bulbs typically last over 30,000 hours and are vibration proof.
Sold as a set of 4
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: E10LED) |
|
| |   Our LED bulbs are a straight swap for standard filament bulbs.
Doubtless you are already aware of the benefits of LED lighting, but if not a Google search will tell you all you need to know.
There are some cheaper versions of these bulbs on the market - ours are best quality units with 24 LEDs in each bulb
Bulb number 1156 is commonly used for bayonet single filament bulbs on vehicles with separate brake and tail lights - identified by two opposing pins at the same height on either side and one contact on base. Please click pic to observe.
Available in white, orange or red - you should replace a bulb with the same colour as the bulb that was removed (usually white) eg if you remove a white bulb from behind an orange indicator lens then you must replace it with a white led bulb, not with an orange one.
Note that these bulbs are slightly brighter than standard - they are not so bright as to cause your vehicle to fail an MoT test.
Note these bulbs are slightly wider at 26mm than a standard bulb which is 23mm, they are standard length.
Best quality available - German made 24 high output LEDs per bulb(Code: 200) |
|
| |   Our LED bulbs are a straight swap for standard filament bulbs.
Doubtless you are already aware of the benefits of LED lighting, but if not a Google search will tell you all you need to know.
There are some cheaper versions of these bulbs on the market - ours are best quality units with 24 LEDs in each bulb
Bulb number 1157 is commonly used for bayonet twn filament bulbs on vehicles with combined brake and tail lights - identified by two offset opposing pins positioned either side of body and two contacts on base. Please click pic to observe.
Available in white, orange or red - you should replace a bulb with the same colour as the bulb that was removed (usually white) eg if you remove a white bulb from behind an orange indicator lens then you must replace it with a white led bulb, not with an orange one.
Note that these bulbs are slightly brighter than standard - they are not so bright as to cause your vehicle to fail an MoT test.
Note these bulbs are slightly wider at 26mm than a standard bulb which is 23mm, they are standard length.
Best quality available - German made 24 high output LEDs per bulb(Code: 201) |
|
| |  Simply replaces your original bulb.
Replaces your normal reversing bulb and emits an audible warning when reversing
Innovative and inexpensive safety product that alerts pedestrians when you are reversing
Emits 21watt light and 110db sound
German manufactured
Available in 12volt (standard vehicle) or 24volt (heavy goods) applications(Code: 249) |
|
| |  Standard halogen H4 bulbs are 60/55W
Turn night into day with these 100/80W direct fit replacements
American sourced, manufactured by CEC(Code: 497) |
|
| |   Convert your standard bulbs to Halogen - 250% brighter.
Converts standard 12volt twin equal height pin bayonet fitting single filament bulbs to 50 watt halogen - will always outshine standard 21w filaments and LEDs
Simply replaces your original bulb.
Very useful to turn reversing lights into a bright beam or upgrade sidelights.
USA manufactured
Sold as a pair(Code: 169) |
|
